7 Easy Steps in How to Remove a Sliding Glass Door

7 Easy Steps in How to Remove a Sliding Glass Door

1. Open the sliding panel and locate the two roller adjustment screws toward the bottom of the panel. Turn the adjustment screws counterclockwise with a Phillips-head screwdriver to raise the bottom rollers. The door panel will lower as you raise the wheels. If you have a headstop on the top of your door track, remove the screws securing the head-stop with the Phillips-head screwdriver. The head-stop is a piece of decorative trim that covers the inside edge of the top door frame Architectural Glass Doors

2. Ask a friend to help lift the sliding door panel up into the upper track, and swing the bottom of the door panel toward you. Lower the door panel until it clears the upper track and set the panel out of your way Glass Bathroom Shelves

3. Remove any screws and brackets securing the stationary panel to the door frame. Most often there will be an L-bracket between the edge of the stationary panel and the door track. There also may be a piece of trim on the lower track that runs the entire width of the opening. Remove the screws with the Phillips-head screwdriver, and remove the brackets and trim pieces Glass door

4. Cut around the seam of the stationary panel where it contacts the door jamb with a utility knife. This will cut through any paint or caulk that is securing the panel to the jamb. Ask your helper to hold the side of the stationary panel while you pry it out of the opening. Insert a flat pry bar between the lower track and bottom of the stationary panel. Lift up on the panel, and pull the lower part of the panel toward you. Remove the panel completely from of the opening with the assistance of your helper Glass Sliding Doors

5. Remove all of the inside trim around the perimeter of the door. Use the pry bar to lift the trim away from the wall enough that you can see the shaft of the nails. Carefully grab the nail shafts with the claw of your hammer or the pry bar and remove the trim from the wall Shower  Glass Doors

6. Insert a bi-metal blade into your reciprocating saw and cut any nails securing the door frame to the walls and header. The bi-metal blade will cut through nails, wood and screws around the perimeter of the door frame Shower Door Installation

7. Pry up the threshold of the door frame with the pry bar and a hammer. The threshold most likely will have glue securing it to the sill. You will need to use some force when prying the threshold. Lift the frame out of the opening with the assistance of your helper. Remove any protruding nails and excess shims from the opening prior to installing your new sliding door Sliding Glass Doors

Read More...

Advantages of Laminated Glass

Advantages of Laminated Glass

Those of you already have a home security system INSTALLED may be looking to beef up your security level even more by installing laminated glass in your windows. Laminated glass New York is also referred to as security glass and is designed to keep burglars from breaking into houses through windows. It is much harder to break than is regular glass, which is why it is so attractive for people who want to take their home security system to the next level. This is the biggest reason why people want to install laminated glass. In the event that a child in your home throws something that hits your window, it is less likely to break. Therefore, the child is safer. Laminated glass does not allow as much sound to get through as does regular glass, meaning your home will be quieter because there will be fewer outside sounds getting through.

Read More...

The Beauty of Decorative Glass Doors

The Beauty of Decorative Glass Doors

The front door is the first point of entry for household guests. It provides visitors and passersby a glimpse into the personality of the inside of a home.

Because first impressions are important, many homeowners opt for the elegance and beauty of decorative glass paneled doors. There are many styles of decorative glass, giving homeowners plenty of opportunity to find the panel that best complements the entrance to their home. Below is information on a few of the types of glass used to create decorative panels for entry doors.

Tempered Glass

Four to five times stronger than standard glass, the strength and heat resistance of tempered comes from the extreme heating and rapid cooling method from which it is produced. This causes it to shatter into little oval-shaped pebbles instead of sharp shards if broken, earning it the nickname "safety glass." In addition to decorative door panels, tempered is used in the production of an immense variety of products that include oven windows, computer screens and shower doors.

Beveled Glass

Popular among door manufacturers, beveled glass is a single pane with edges cut at an angle around the entire perimeter. The beveled edges allow it to capture light in a unique way that produces a wide spectrum of visually appealing colors. Beveled is typically cut from standard glass. However, some artists and manufacturers also perform the beveled process on colored textured glass to enhance the beauty of a design.

Read More...

A Great Shower Door Installation

A Great Shower Door Installation

If you do it the right way, there are few pleasures on earth better than a hot shower in a glass-encased shower stall. Of course, there's one thing that really is better than that - a hot shower in a shower stall encased in glass that you put there yourself. A shower door installation, for the DIY enthusiast, can be a very entertaining project to take up. It isn't that hard, but it does involve skill, patience, the use of the right tools and results that can simply look stunning. Stunning in the way that can make you feel good about yourself. So here's a little shower door installation guide for the first-time DIY enthusiast.

The first thing you need to do is to cut that track. You need to carefully measure the area inside the shower door, and use the measurement to cut the track. You can use a hack saw for it. If you really want straight edges, a miter box would be good idea.

You need to temporarily hold the track in place now. You need to place it on the bathtub or the shower area and then hold it in place with tape. Look for the side rails and slide them in place. You can use a plumb level to make sure that things are level.

Now you need to mount the jambs on either side of the curb. First mark the holes where they will go, and then remove the jambs and everything. You'll need to roll out the heavy equipment now. Get a 3/16 inch bit for you drill that is able to cut into a smooth surface like tile, and drill away. You only need to get plastic nail holders or wall holders that'll be able to hold screws now. You hammer them into the holes you've made, and you're set for the screwing in.

Read More...